Customizable mesh pool fencing with removable sections, aluminum alloy poles and supplied fence accessories for drilled concrete installation.
Free InquiryA removable mesh pool fence creates a defined barrier around a swimming pool area using mesh fabric supported by aluminum alloy poles. The fence sections connect along the planned route, and adjacent sections can be disconnected at their joining point for access.
The height and total length can be customized for your layout. Measure the fence route around the area to be enclosed, rather than relying only on the dimensions of the pool itself.
This removable mesh pool fence is made from connected sections. When access is needed, open the connection between adjacent sections and reconnect it afterwards. Sections can also be removed and reinstalled according to the product instructions.
Keep the connection closed after each use. Opening a section creates a temporary gap in the barrier, so do not leave it open when access should be restricted.
The standard model has no independent gate. If your project needs a dedicated gate, another gate model can be supplied as part of the overall fence solution. Gate closing and latching features depend on the model selected.
The mesh swimming pool fence uses 340 g/m² Teslin PVC mesh fabric and aluminum alloy poles. The feet and connecting locks are stainless steel. Fence accessories are included. You will need to prepare the installation tools.
This removable mesh pool fence is designed mainly for installation on concrete. Drilling is required to fix the fence to the surface. Plan the route, mark pole positions, drill according to the supplied instructions, install the supplied fixing accessories and poles, and connect the sections.
Prepare a measuring tape, marking tool, level, drill suitable for concrete, a matching concrete drill bit, a tool to clean the holes and protective equipment. The fence accessories are supplied with the fence; the drill, drill bit and other tools are prepared by the buyer. The exact accessory quantities depend on the agreed layout.
Drill bit diameter and hole depth depend on the supplied hardware. Other ground surfaces require a review of the installation conditions.
Inspect the mesh, poles, fixing points and section connections regularly. Reconnect the fence after access and follow the product instructions when removing or reinstalling sections. A pool safety fence is one layer of protection and does not replace active adult supervision.
| Fence type | Removable mesh sections |
|---|---|
| Dimensions | Height and length customized to the project |
| Mesh fabric | 340 g/m² Teslin PVC mesh fabric |
| Poles | Aluminum alloy |
| Feet and connecting locks | Stainless steel |
| Main installation surface | Concrete |
| Installation | Drilling required; buyer prepares tools |
| Fence accessories | Supplied with the product |
| Separate gate | Not included; another gate model can be supplied |
| Estimated lead time | Approximately 15–30 days depending on quantity and customization |
Measure the complete route where the fence will be installed, including corners and the planned access point. Identify the concrete areas along the route. A simple drawing helps explain the poolside layout, nearby walls and changes in direction.
For example, if the planned fence route has four sides measuring 5 m, 4 m, 5 m and 4 m, the total route is 18 m. This is an example, not a standard size. Mark any planned gate or connection point on your sketch so the final section layout can be worked out.
Provide the required total length and height, a layout drawing or description, the installation surface, quantity and delivery destination. Tell us if the project requires a separate gate model. We can configure the removable mesh pool fence to the agreed dimensions.
The estimated lead time for a removable mesh pool fence is 15–30 days, depending on order quantity and customization. The precise accessories and quantities depend on the final fence configuration. Pool barrier rules differ by destination and installation; review local requirements before ordering.
It is a barrier made from mesh, poles and connected sections. This model requires drilling and is primarily intended for concrete. Adjacent sections can be disconnected at their joining point for access.
No. The standard model has no separate gate. To enter, disconnect the join between two adjacent sections and close it again after passing through. If you need a separate gate, another gate model can be supplied with the fence solution.
The standard model has no separate gate, so it has no automatic gate closing or latching function. If another gate model is supplied, ask for its specific closing and locking details before ordering.
Yes. This model requires holes to be drilled in the installation surface, mainly concrete. Fence accessories are supplied; you prepare the drill, a suitable concrete bit and the other installation tools. Hole and bit sizes depend on the supplied hardware and instructions.
The main intended surface is concrete. For pavers, timber decking, soil or another surface, the base and fixing method need to be reviewed before ordering. Do not assume the concrete installation method works on every surface.
Measure the whole route where the fence will go, including corners and the planned access point. For example, 5 m + 4 m + 5 m + 4 m gives an 18 m route. This is the route length, not necessarily the amount of mesh: the section layout depends on the access opening and any gate. Send the route, desired height and a sketch with any planned gate marked.
Adjacent sections connect together, and fence dimensions are customized before production. We have not confirmed that a section can be cut on site. If you need to cut one after delivery, check the method before ordering or cutting.
Yes. Sections can be disconnected and removed, then reinstalled in accordance with the supplied instructions. Check the poles, fixings and connections after reinstallation.
The height and length can be customized, but corners, curves and changes in level affect how sections are arranged. Send a sketch with measurements and photos of the installation surface so the layout can be reviewed before production.
Requirements vary by destination and installation, including fence height, openings and access. We have not established certification for this specific configuration. Check the rules for your location and request the product documents before relying on it as a compliant barrier.
